All CCTV Brand Default IP Address, Username and Password

In this article, we are going to learn All CCTV Brand Default IP Address, Username, and Password. Sometimes you need to know the username and password if you want to make some changes in the CCTV system, If you want to add a camera to the CCTV system or back up CCTV video, you need to know the username and password. If you have forgotten the password of the CCTV system and want to reset it, then you need to know the Default IP Address, Username, and Password of the CCTV system.

Default IP Address, Username, and Password Hikvision:

For old models (before firmware 5.3.0)
Username: admin
Password: 12345
IP Address: 192.0.0.64

Default IP Address, Username, and Password CP Plus:
User name: admin
Password: admin
IP Address : 192.168.1.108 / 192.168.1.240

Default IP Address, Username, and Password Dahua:
Username: admin
Password: admin

For DVR and NVR, the following are the default accounts:
admin/admin/123456 (master account of local and network accessing)
888888/888888 (local administrator)
666666/666666 (restricted user)
default / default (hidden user)

Default IP Address, Username, and Password Bosch:
For old models:
Username: service
Password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button for about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk)

Also Read – How To Configure Hikvision CCTV IP Camera For NVR

All CCTV Brand Default IP Address, Username, and Password:

Also Read – Step By Step Configure Hikvision NVR-DS-8664NI-I8

That’s all, In this article, we have explained All CCTV Brand Default IP Address, Username, and Password. I hope you enjoy this article. If you like this article, then just share it. If you have any questions about this article, please comment.